Model Temperature Controller

Detailed Product Description

Specifications: 
1) Range: -20°C ~ 200°C
2) Accuracy: Grade 0.5
3) Definition: 0.1°C
4) Transducer: PTL00
5) Output junction: passive junction AC 30A 250V
6) Setup error: 0.5%
7) FS return difference: 1.5°C
8) Working environment: 
    a) Temperature: -10 ~ 50°C
    b) Humidity: <95% RH
9) Power: <3W
10) Working power supply: AC 220V
11) Dimensions: 160 x 100 x 48mm
 
Applications:
1) After fixing up temperature controller, adjusting temperature switch on the 
    panel
2) Connecting transducer, power supply and electric heater according to the 
    interconnection diagram of temperature controller, then open power switch 
    on the panel
3) The actual measurement value of transducer will be displayed on temperature 
    display window
4) When temperature value is less than setup ones, it will start to heating, and
    heater contact will be cut off while actual measurement temperature reaches 
    setup ones
5) When temperature is less than 1.5°C of setup value, temperature 
    controller will connect with heater again
 
Notice:
1) The installation location of temperature transducer can reflect the actual 
    temperature of temperature control point directly
2) When the wire length of temperature transducer exceeds one meter, it will 
    use three-wire system to increase measure precision. It will adopt two-wire 
    system when the wire is shorter, but 2 or 3 feet of terminal should be shortly 
    connected
3) When the heating load of temperature controller is larger than 2kW, it should 
    be connected with AC contactor
4) The temperature controller should be placed on the occasion that avoid wet 
    and have no serious pollution to maintain its working life
5) Please contact with the manufacturer when the working is abnormal. Don't 
    take shell apart to cause safety misadventure